Incorrect Image Size Or Position; Slanted Printout - Epson WF-C17590 User Manual

Incorrect Image Size or Position

Slanted Printout

Downloaded from ManualsNet.com search engine
• If you are using the Windows PostScript printer software, the product cannot print binary data if it is
connected to the computer using a USB cable. Try selecting ASCII or TBCP as the Output Protocol
setting on the Device Settings tab in the printer properties.
• If you are using the Windows PostScript printer software, select the appropriate substitution fonts on
the Device Settings tab in the printer properties.
Parent topic: Solving Page Layout and Content Problems
If your printed image is the wrong size or in the wrong position, try these solutions:
• Make sure you selected the correct paper size and layout settings in your printing program and printer
software.
• Make sure you selected the correct paper size on the control panel.
• Make sure your paper is positioned correctly for feeding into the printer.
• Clean the scanner glass and document cover.
• If the edges of a copy are cropped, slightly move the original away from the edges of the scanner
glass.
You can use the preview option in your printer software to check your margins before you print.
Parent topic: Solving Page Layout and Content Problems
Related tasks
Selecting Basic Print Settings - Windows
Selecting Additional Print Options - Windows
Selecting Basic Print Settings - Mac
Selecting Page Setup Settings - Mac
Cleaning the Automatic Document Feeder
If your printouts are slanted, try these solutions:
• Slide the edge guides against the edges of the paper.
• Select a higher print quality setting in your printer software.
• Turn off any high speed settings in your product software.
• Adjust the print quality.
381