Configuration Data Tags; Input Data Tags - Rockwell Automation Allen-Bradley 1756-SYNCH User Manual

Controllogix synchlink module
Hide thumbs Also See for Allen-Bradley 1756-SYNCH:
Table of Contents

Advertisement

Configuration Data Tags

Table E.1 Configuration Data Tags
Name
(x = module's chassis slot location):
Local:x:C.ChassisCSTMst
Local:x:C.SLCSTMst
Local:x:C.RemainChassisCSTMst
Local:x:C.TempChassisCSTMst

Input Data Tags

Table E.2 Input Data Tags
Name
(x = module's chassis slot location):
Local.x.I.Fault
Local.x.I.ChassisMultiMaster
Local.x.I.ChassisCSTFault
Local.x.I.SynchLinkRxFault
Local.x.I.SynchLinkDataFault
Local.x.I.SynchLinkFormatFault
Local.x.I.SynchLinkMultiMaster
Table E.1 lists the configuration data tags available on your 1756-SYNCH
module. These tags control the configurations described in Table 3.7 on
page 3-18.
Type:
Definition:
BOOL
If this bit is set to 1, the module becomes the CST master for its chassis.
BOOL
If this bit is set to 1, the module becomes the CST master for the entire
SynchLink.
BOOL
If this bit is set to 1, the module remains Chassis CST master for its chassis
even if communications with the SynchLink CST master are lost.
BOOL
If this bit is set to 1, the module acts as Chassis CST master for its chassis
and ignores the SynchLink CST master.
Table E.2 lists the input data tags available on your 1756-SYNCH module.
Type:
Definition:
DINT
BOOL
0 = The chassis has no CST master or one CST master
1 = This module is configured to be CST master, but another module is active
as CST master.
BOOL
0 = Chassis CST value is not faulted.
1 = Chassis CST value is faulted.
BOOL
0 = The module's receive port is functioning properly.
1 = A fault has occurred on the module's receive port.
BOOL
0 = Either no data received from upstream module (see other faulty bits) or
upstream device not in idle state
1 = Upstream device producing data for this module is in the idle state
BOOL
0 = The module's communications formats are properly configured.
1 = This modules receive port communications format does not match the
upstream module's transmit port communications format
BOOL
0 = One node is configured as the master of the SynchLink .
1 = Multiple nodes are configured as the master of the SynchLink.
Software Configuration Tags
Publication 1756-UM521C-EN-P - July 2004
E-3

Advertisement

Table of Contents
loading

Table of Contents