Vitrifrigo DW Series Instruction Manual page 28

Description of the appliance – CDW series (Single drawer)
B A
5. INSTALLATION
Installation key:
the presence of the letters I and L in the model code indicate the version relative to the
type of installation envisioned
I = version with internal motor for recessing
L= version with remote motor for recessing
(E.g. DW35RFL = DW35 model code L letter for recessed version)
Ensure that the refrigerator is not damaged when opening the packaging after receiving
the product. Any transportation damage must be reported promptly to the reseller and,
in any case, within 24 hours of taking delivery of the appliance. Handle the product with
the utmost care and attention. When positioning the refrigerant unit (in refrigerator models
with a remote refrigerant system), take precautions to avoid obstructions and breaking
the connection pipes. Always position the refrigerator and the remote refrigerant unit (in
the versions with such a solution) on a horizontal surface that can support the weight of
the appliance and its eventual contents. Once installation has been completed, check
that the refrigerator is not resting on a power cable. If the power cable is damaged,
it must be replaced immediately by someone from the technical service centre or
by someone suitably qualified, in order to avoid any risk. Place the refrigerator away
from heat sources ensuring that it has enough ventilation as in the following installation
examples.
Once the refrigerator has been positioned, wait at least one hour before switching it on.
28 ENG
D E C
A) Evaporator
B) Drip tray
C) Thermostat box
D) Removable grilles
D) Drawer divider