Terminal Format Support - Network Electronics Flashlink HD-EO-2 User Manual

HD-EO-2

4.2 Terminal format support

The different input and output ports on HD-EO-2 can support a number of
formats. The table below shows which signal formats are supported on the
selected terminals.
Terminal format support:
Terminal Function
OPT1 Optical output
OPT2
IN1 Electrical Input
IN2
OUT1+ Electrical Output –
OUT2+ Reclocked DA
output
OUT1- Electrical Output –
OUT2- Reclocked DA
inverted output
GPI ALARM Open Collector
Alarms
∗
HD-EO-2 has a "Transparent mode". In this mode all reclockers are switched off and no jitter attenuation
will be performed. This mode may be used for non-standard or unsupported bit rates over shorter
distances and up to 1 Gbps.
Supported Format
HD-SDI, SDI, DVB-ASI,
SMPTE310, Transparent
HD-SDI, SDI, DVB-ASI,
SMPTE310, Transparent*
HD-SDI, SDI, Transparent*
HD-SDI, SDI, Transparent*
Wired alarms
Rev. 3
Mode
Output
∗
Input
Output
Output
OC Output
10