Terminal Format Support - Network Electronics Flashlink SDI-EO-2 User Manual

SDI-EO-2 /SDI-EO-2-RC

4.2 Terminal format support

The different input and output ports on SDI-EO-2 / SDI-EO-2-RC can support
a number of formats. The table below shows which signal formats are
supported on the selected terminals.
Terminal format support:
Terminal Function
OPT1 Optical output
OPT2
IN1 Electrical Input
IN2
OUT1 Electrical Output
OUT2
GPI ALARM Open Collector
Alarms
Supported Format
SDI, DVB-ASI, SMPTE310 Output
SDI, DVB-ASI, SMPTE310 Input
SDI, DVB-ASI, SMPTE310 Output
Wired alarms
Rev. 2
Mode Connector
SC/UPC
BNC
BNC
OC Output RJ45
10