Materials Declaration And Recycling Information; Materials Declaration; Environmentally-Friendly Use Period - Network Electronics Flashlink HD-EO-2 User Manual

HD-EO-2

Materials declaration and recycling information

For product sold into China after 1st March 2007, we comply with the "Administrative
Measure on the Control of Pollution by Electronic Information Products". In the first
stage of this legislation, content of six hazardous materials has to be declared. The table
below shows the required information.
組成名稱
鉛
Part Name
Lead
(Pb)
HD-EO-2 X
O: Indicates that this toxic or hazardous substance contained in all of the homogeneous materials for
this part is below the limit requirement in SJ/T11363-2006.
X: Indicates that this toxic or hazardous substance contained in at least one of the homogeneous
materials used for this part is above the limit requirement in SJ/T11363-2006.

Environmentally-friendly use period

The manual must include a statement of the "environmentally friendly use period".
This is defined as the period of normal use before any hazardous material is released to
the environment. The guidance on how the EFUP is to be calculated is not finalised at
the time of writing. See
http://www.aeanet.org/GovernmentAffairs/qfLeOpAaZXaMxqGjSFbEidSdPNtpT.pdf
for an unofficial translation of the draft guidance. For our own products, Network
Electronics has chosen to use the 50 year figure recommended in this draft regulation.
Network Electronics suggests the following statement on An "Environmentally Friendly
Use Period" (EFUP) setting out normal use:
EFUP is the time the product can be used in normal service life without leaking the hazardous materials.
We expect the normal use environment to be in an equipment room at controlled temperature range
(0ºC - 40ºC) with moderate humidity (< 90%, non-condensing) and clean air, not subject to vibration or
shock.
Further, a statement on any hazardous material content, for instance, for a product that
uses some tin/lead solders:
Where a product contains potentially hazardous materials, this is indicated on the product by the
appropriate symbol containing the EFUP. The hazardous material content is limited to lead (Pb) in some
solders. This is extremely stable in normal use and the EFUP is taken as 50 years, by comparison with the
EFUP given for Digital Exchange/Switching Platform in equipment in Appendix A of "General Rule of
Environment-Friendly Use Period of Electronic Information Products". This is indicated by the product
marking:

Materials declaration

Toxic or hazardous substances and elements
汞 镉
Mercury Cadmium Hexavalent
(Hg) (Cd) Chromium
O O
六价铬 多溴联苯
Polybrominated
biphenyls
(Cr(VI)) (PBB)
O O
Rev. 3
多溴二苯醚
Polybrominated
diphenyl ethers
(PBDE)
O
17