Advertisement
Quick Links
Check the Supplied Items
The shipping package includes the following items:
PCI-P16C16U
Board Layout
Note: For more details regarding the Card ID and Jumper settings, refer to the PCI-P16C16
Series User Manual.
1
PCI-P16C16U Quick Start Guide
Website: http:// www.icpdas.com.tw
Software Utility CD
(V6.2 or later)
E-Mail: service@icpdas.com , service.icpdas@gmail.com
For PCI-P16C16U
English/Oct. 2015/Version 1.0
Quick Start Guide
(This Document)
1. CN1 Connector
(See Section 5 Pin Assignments)
2. CN2 Connector
(See Section 5 Pin Assignments)
3. SW1: Card ID Switch
(The default setting is 0x0.)
4. JP1 ~ JP8, JP9 ~ JP16: Input
Signal Type Jumper
5. J1, J2: Set the Ground Isolation
Protection
CA-4037W
CA-4002 D-Sub
Cable x 1
Connector x 2
ICP DAS CO., LTD.
Advertisement
Related Manuals for ICP DAS USA PCI-P16C16U
Summary of Contents for ICP DAS USA PCI-P16C16U
- Page 1 5. J1, J2: Set the Ground Isolation Protection Note: For more details regarding the Card ID and Jumper settings, refer to the PCI-P16C16 Series User Manual. PCI-P16C16U Quick Start Guide ICP DAS CO., LTD. Website: http:// www.icpdas.com.tw E-Mail: service@icpdas.com , service.icpdas@gmail.com...
-
Page 2: Installing The Windows Driver
“Finish” button. Note: For detailed information about the driver installation, refer to Chapter 2 “Install UniDAQ Driver DLL” of the UniDAQ SDK User Manual. PCI-P16C16U Quick Start Guide ICP DAS CO., LTD. Website: http:// www.icpdas.com.tw E-Mail: service@icpdas.com , service.icpdas@gmail.com... -
Page 3: Installing The Hardware
Step 2: Remove all the covers from the computer. Step 3: Select an unused PCI slot. Step 4: Carefully insert the PCI-P16C16U board into the PCI slot and secure the board in place. Step 5: Replace the covers on the computer. -
Page 4: Pin Assignments
External Power Input Conversion from DB-40-pin to DB-37-pin GND: External Power Ground OUT: Open Collector Output DIA: Digital Input (Point A) DIB: Digital Input (Point B) PCI-P16C16U Quick Start Guide ICP DAS CO., LTD. Website: http:// www.icpdas.com.tw E-Mail: service@icpdas.com , service.icpdas@gmail.com... - Page 5 Step 3: Connect the External Power Supply GND to the CN1.GND1 pin (Pin22) and CN1.GND2 pin (Pin26). Step 4: Connect the External Power Supply +24V to the CN1.Ext.Power1 pin (Pin20) and CN1.DIB0 pin (Pin30). PCI-P16C16U Quick Start Guide ICP DAS CO., LTD. Website: http:// www.icpdas.com.tw E-Mail: service@icpdas.com , service.icpdas@gmail.com...
- Page 6 “ICPDAS” folder. Point to “UniDAQ Development Kits”and then click the “UniDAQ Utility” to execute the UniDAQ Utility Program. Step 2: Confirm that the PCI-P16C16U board has been successfully installed in the Host system. Note that the device numbers start from 0. Step 3: C lick the “TEST”...
-
Page 7: Related Information
5. Select “Port0” from the “Port Number” drop-down menu. 6. The DI indicators will turn red when the corresponding DO channel 0 is ON. Related Information PCI-P16C16U Series Board Product Page: http://www.icpdas.com/root/product/solutions/pc_based_io_board/pci/pci-p16c16.html DN-37, DB-665 and CA-3710 Product Pages (optional): http://www.icpdas.com/root/product/solutions/pc_based_io_board/daughter_boards/dn -37.html http://www.icpdas.com/root/product/solutions/accessories/power_supply/dp-665.html http://www.icpdas.com/products/Accessories/cable/cable_selection.htm...