Page 1
The PISO-DA2 series driver supports Windows 98/NT/2K and 32-bit XP/ 2003/ Vista/7/8. Recommended to install this driver for have been used PISO-DA2 series board of regular user, please refer to : http://ftp.icpdas.com/pub/cd/iocard/pci/napdos/pci/piso-da2/manual/quickstar t/classic/ PISO-DA2U Quick Start Guide ICP DAS CO., LTD. WebSite: http:// www.icpdas.com.tw E-Mail: service@icpdas.com , service.icpdas@gmail.com...
7. SW1: Card ID setting. For more detailed jumper information, please refer to manual section 2.2 Configuration of D/A Output signal. (CD:\NAPDOS\PCI\PISO-DA2\manual\) PISO-DA2U Quick Start Guide ICP DAS CO., LTD. WebSite: http:// www.icpdas.com.tw E-Mail: service@icpdas.com , service.icpdas@gmail.com...
Page 3
Bipolar (Default) (Default) JP3/JP7: 0~20 mA or 4~20 mA current loop setting. channel 4-20 mA 0-20 mA channel 4-20 mA 0-20 mA (Default) (Default) PISO-DA2U Quick Start Guide ICP DAS CO., LTD. WebSite: http:// www.icpdas.com.tw E-Mail: service@icpdas.com , service.icpdas@gmail.com...
Step 6: Power on the computer. After powering-on the computer, please finish the Plug&Play steps according to the prompted messages. Pin Assignments CN1 and CN2 D/A Connector (Male DB9). PISO-DA2U Quick Start Guide ICP DAS CO., LTD. WebSite: http:// www.icpdas.com.tw E-Mail: service@icpdas.com , service.icpdas@gmail.com...
Page 5
DN-09-2 3. Connect the positive probe (+) of Multi-meter to CN1.V_OUT (Pin 01). 4. Connect the negative probe (-) of Multi-meter to CN1.GND (Pin 04). PISO-DA2U Quick Start Guide ICP DAS CO., LTD. WebSite: http:// www.icpdas.com.tw E-Mail: service@icpdas.com , service.icpdas@gmail.com...
Page 6
6. Get Analog Output function test result. Click “Analog Output” item. Click this button. Select the “Port 0” Select the Type the voltage value “Unipolar 0~5V” PISO-DA2U Quick Start Guide ICP DAS CO., LTD. WebSite: http:// www.icpdas.com.tw E-Mail: service@icpdas.com , service.icpdas@gmail.com...
The value read on meter may be a little difference from the DA value because of the resolution limit of meter or the measurement error. Related Information PISO-DA2U Series Card Product Page: http://www.icpdas.com/root/product/solutions/pc_based_io_board/pci/piso-da2.html CA-0915 and DN-09-2 page (optional): ...