Installer Setting-Celsius / Fahrenheit Switching - LG ATNH12GPLE1 Installation Manual

OPTIONAL OPERATION
30

Installer Setting-Celsius / Fahrenheit Switching

This function is used for switching the display between Celsius and Fahrenheit.
(Optimized only for U.S.A)
h Whenever press
degrees.
If pressing
1
seconds, it enters into remote
controller setter setup mode.
- If pressing once shortly, it enters
Repeat pressing
2
Function code 12.
Ex) Fahrengeit Setting
Select Temperature unit mode by pressing
3
button.
(00: Celsius, 01: Fahrenheit)
Press
4
Press
5
will automatically exit after 25
seconds without any input.
button in Fahrenheit mode, the temperature will increase/drop 2
button long for 3
into user setup mode.
Please press more than 3 seconds for
sure.
button to select
Function Code
conversion mode value
button to save or release.
button to exit or system