Installer Setting - Celsius/Fahrenheit Switching - LG ABNW60GM3S1 Installation Manual

Installer Setting - Celsius/Fahrenheit Switching

This function is used for switching the display between Celsius and Fahrenheit.
(Optimized only for U.S.A)
FAN
SPEED
TEMP
- Whenever press temp up(▲), down(▼) button in Fahrenheit mode, the temperature will
increase/drop 2 degrees.
1
2
OPER
MODE
3
4
OPTIONAL OPERATION
When pressing the
button simultaneously for more than 3
seconds, the system will be entered into the
installer setting mode.
- After entering into the installer setting
mode, select the ceiling height setting code
value by pressing the oper-mode button.
* Celsius/Fahrenheit setting code value : 12
Select the desired setting value with the
temperature up(▲), down(▼) button.
Code value
Value
When pressing button, currently
established celsius/Fahrenheit setting
value will be set up.
When pressing the
button simultaneously for more than 3
seconds after the setting has been completed,
the setting mode will be released.
- If there isn't any button input for more than
25 seconds, the installer setting mode will
also be released.
19
OPER
button and
MODE
*Setting value
00:Celsius
01:Fahrenheit
OPER
button and
MODE