Identifying Printer Connections - Avery Dennison Monarch 9844 Operator's Handbook Manual

05/08 Rev. AB
Start/stop signal input
Connection for a foot switch
(signal starts the printer) or a
stacker (signal stops the
printer).
OPERATOR'S HANDBOOK
9844/9854

Identifying Printer Connections

CAUTION! - Only use approved add-on devices or damage to the printer
may occur.
Only connect devices that fulfill SELV (Safety Extra-Low Voltage) circuit
requirements to EN 60950.
Connect only original accessories.
Refer to the "Advanced Applications" section on your CD-ROM for more
information about the 9854 network connection.
Power switch
Turns printer on/off.
Fig. 8: Back view of the 9854 printer.
Serial Interface
RS232 or RS422/485, on the
optional I/O board.
Power supply
Connection to the power supply
using the supply cable provided.
Getting Started
Signal interface
4 inputs / 3 outputs, belongs to
the optional I/O board.
Keyboard connection
In offline mode, the keyboard
can be used for data input and
print job selection.
Centronics connection
For parallel data transfer.
USB connection
For USB data transfer.
Card insert (9854 only)
For Compact Flash cards,
which can be used to save
fonts, logos or graphics.
RS232 interface
For serial data transfer.
Status LED/Ethernet
(9854 only)
Network connection
(9854 only)
Connection for an Ethernet 10/
100 BaseT network.
1-8