Using The Printer; Connecting The Printer - Avery Dennison Monarch 9844 Operator's Handbook Manual

05/08 Rev. AB

Using the Printer

1. Turn off the printer. On the back of the printer press (O) to turn off the printer.
2. Connect the printer to the power supply using the cable provided.
3. Using the data cable supplied, connect the Centronics interface on the
4. Turn on the printer. On the back of the printer, press (I) to turn on the printer.
5. Press Online to switch to the online mode:
OPERATOR'S HANDBOOK
9844/9854

Connecting the Printer

WARNING!
Touching live electrical parts causes exposure to hazardous electrical
currents that may lead to burns!
Make sure the printer is turned off before connecting the power cable.
Only connect the printer to an electrical outlet that provides the correct volt-
age, which can be found on the rating plate.
Only connect the printer to a grounded electrical outlet fitted to authorized
standards.
Connect the power cable so that:
– no one trips or steps on it.
– it can be easily unplugged from the power outlet.
printer to the host computer.
Display
System start...
System start...
Start user prog
Avery AP 5.4
V 1.02
Memory: 8MB
Flashcard: 32MB
OFFLINE 0 JOBS
Tab. 4: Messages on the display when the printer is turned on.
ONLINE 0 JOBS
When the parameter SYSTEM PARAMETER > Turn-on mode is set to Online,
the printer switches to online mode when turned on.
Description
The boot loader has started.
Valid firmware recognized, program starts.
Printer type (for example: AP 5.4/9854)
Version number of the printer firmware.
Internal RAM (for example: 8 MB)
Optional RAM on the Compact Flash card (for
example: 32 MB) – only displayed when a
Compact Flash card is in use.
Offline mode
Getting Started
1-13