Scope Of Delivery; Specialist Installer Qualifications; Intended Use - Maico ER-A Installation And Operating Instructions Manual

Preface
ER-A standard cover:
1 Cover – upper part
3 Timestrip (→ Title
page)
ER-AK comfort cover
1 Cover – upper part
ER-AH cover with humidity control
1 Cover – upper part
6 Humidity sensor
(rear side cover)
Cover with ER-AB motion detector
7 Cover – upper part
9 Motion sensor
Overview figure
10 Accommodation
mounts (3 pieces)
12 Sealing plugs – mo-
tor board interface
(ER-AK, ER-AH,
ER-AB)
14 Hole for central
screw
16 Central screw, self-
tapping
18 Upper part of cover
(1 or 7)
Preface
Please read the instructions carefully before in-
stalling and using for the first time. Follow the in-
structions. Pass these instructions on to the
owner for safekeeping.

1 Scope of delivery

• Central screw
• Air filter
• Installation and operating instructions
ER-A
Article no. 0084.0361
2 Cover – lower part
4 Cover – lower part
with touch control
unit
5 Cover – lower part
with touch control
unit
8 Cover – lower part
with touch control
unit
11 Locking hook (3
pieces)
13 Fan insert with rat-
ing plate
15 Lower part of cover
(2, 4, 5, or 8)
17 Air filter
• Standard cover: Lower and upper part of cover
• Time strip on title page of these instructions
ER-AK
Article no. 0084.0362
• Comfort cover: Lower and upper part of cover
ER-AH
Article no. 0084.0363
• Cover with humidity control
• Lower and upper part of cover
ER-AB
Article no. 0084.0364
• Cover with motion detector
• Lower and upper part of cover
For accessory components with more de-
tailed information and order numbers: System
and accessory components [} 30]

2 Specialist installer qualifications

Installation may only be carried out by trained
specialists who have the necessary knowledge
and experience in ventilation engineering. The
unit must be connected in accordance with the
national technical approval.
Only a qualified electrician is permitted to work
on the electrics. You are deemed a qualified elec-
trician if you are familiar with the relevant stand-
ards and guidelines, can competently and safely
connect units to an electrical power supply in line
with the Wiring diagrams and are able to recog-
nise and avoid risks and dangers associated with
electricity on the basis of your technical training
and experience.

3 Intended use

ER EC fans are used to extract air from interior
bathrooms and toilet rooms, storage rooms or
open-plan kitchens (with outside windows), for ex-
ample in multi-storey residential buildings, retire-
ment homes or hotel complexes.
Installation in a ventilation shaft, in the wall, front
wall or a suspended ceiling is permissible.
The fans can be used as standalone units or for
toilet seat air extraction (according to
DIN 18017-3).
The fans are only intended for domestic use and
similar purposes.
19