Table of Contents
Advertisement
STEPS BEFORE USE
Carefully read the safety instructions and the operating instructions. Make sure that you un-
derstand the safety instructions, operating instructions and warning decals. Use common
sense when using the product and suitable personal protective equipment. Always check the
performance of the machine combination to be used. It is important that these are in harmony
and work satisfactorily. This is done to ensure the equipment or product work as expected, and
to guarantee the safety of yourself and others. Carry out a visual inspection of the equipment
or product before use. Repair or replace damaged or worn parts to reduce the risk of injury.
Grease moving parts and check that all nuts and bolts are tightened. Correct if necessary.
Learn and remember the correct working method. Beginners must work slowly until they have
learned how the machine or product works. Users/customers are responsible for ensuring us-
ers can handle the situation. If users feel that the machine is dangerous to use, it should not
be used.
Warning!
•
Perform a safety check of the machine before each use. If you notice any errors or omis-
sions, the machine should immediately be repaired.
•
Make sure there are no foreign objects in the machine before using it.
•
During operation, the machine must be on a hard, flat surface. Avoid working on slippery
surfaces, especially in winter
•
Check the work area before operation. Make sure there are no people or animals nearby.
•
Clear working area of stones, branches or hidden obstacles that might be hooked or
snagged, causing injury or damage. Use only in daylight or good artificial light. Be sure
machine is properly mounted, adjusted and in good operating condition. Ensure that all
safety shielding and safety signs are properly installed and in good condition.
For safety, this product should only be used in the manner
described in this manual. The user is responsible for the in-
struction to be read through and followed.
Warning!
To ensure safety, the product must be used only in the manner prescribed
in this instruction. The user is responsible for the instruction being read
through and followed.
5
Advertisement
Table of Contents
