Manual Recording Setup Rec Setup; Externally Specified Recording Mode Ext Rec; Display Setup Display Setup - Panasonic WJ-HD200 Operating Instructions Manual

Manual Recording Setup REC
SETUP
The WJ-HD200 will record image and audio data in either
ways with or without restrictions of the timer. Manual
recording is available when OFF is selected for TIMER in
the WJ-HD200 MAIN menu, and is free from timer sched-
ule. Alarm recording will also be carried out with parame-
ters specified in this menu.
WJ-HD200 MAIN MENU
TIMER
O
REC SETUPO
EXT REC SETUPO
DISPLAY SETUPO
SYSTEM SETUPO
ALARM SETUPO
COMMUNICATION SETUPO
SWITCHER SETUPO
SYSTEM INFORMATIONO
Refer to l Recording Mode Setup PROGRAM "1-4" NO. "1-
4" SETUP for operating procedures and available parame-
ters.
Externally Specified Recording
Mode EXT REC
This setting allows the recording mode to change from
ongoing one to optional one specified here when turning on
the externally connected switch to the EXT REC terminal.
1. Move the cursor to EXT REC MODE with the [D] or [C]
button.
2. Select the desired mode with the JogDial, and press
the JogDial.
Refer to page 26 and 27 for the recording mode para-
meters.
3. Press the [SETUP/ESC] button to return to the WJ-
HD200 MAIN menu.
28
OFF

Display Setup DISPLAY SETUP

You can program such information displays on the monitor
as clock, time and date, and so forth.
DISPLAY SETUP
CLOCK JUN30.03
TIME&DATE
TIME&DATE DISP.ON
TIME&DATE POSI.R-LOWER
STATUS DISP.
STATUS POSI.
HDD FULL
REMOTE LED
HDD CHECK
CAMERA TITLEO
Clock CLOCK
1. Press the JogDial (SET) to move the cursor to the
desired position.
2. Rotate the JogDial clockwise to increase the parameter,
or counter-clockwise to decrease. Each position indi-
cates the year, month, day, hour, and minute.
The default is "JAN 01. 03 00:00".
MM DD YY HH : MM
3. Press the JogDial (SET) to validate the selection.
4. Press the [D] or [C] button to select the next item, or
press the [SETUP/ESC] button to quit the display setup.
Time & Date TIME & DATE
1. Select a display type with the JogDial.
The default is TYPE1 24H.
TYPE1 24H: Time and date are displayed in one line in
the 24-hour system.
TYPE1 12H: Time and date are displayed in one line in
the AM-PM system.
TYPE2 24H: Time and date are displayed in two lines in
the 24-hour system.
TYPE2 12H: Time and date are displayed in two lines in
the AM-PM system.
JUN30.03
TYPE1
TYPE2
15:05
TYPE1 24H
ON
R-LOWER
1%
ON
0:00
20:00:00
JUN30.03
20:00:00