System Setup System Setup - Panasonic WJ-HD200 Operating Instructions Manual

3. Select either ON or OFF with the JogDial.
The default is ON for all cameras.
ON: Enables camera title display, title registration, and
position selection.
OFF: Disables the camera title functions.
4. Press the JogDial (SET) to validate the selection.
When on is selected, go to the following steps. The cur-
sor moves to the title edit area.
When off is selected, return to step 2 above, or press
the [SETUP/ESC] button to escape from the CAMERA
TITLE menu.
5. <Editing>
5-1 Select a character for the digit with the JogDial.
Each title is identical to the camera number: 1, 2, 3,
and so forth as the default.
Available characters are as follows.
0 ~ 9 A ~ Z ! % &
( ) * – / : . ?
5-2 Press the JogDial to validate the selection for the
digit.
The selected character is displayed on the digit,
and the cursor goes to the right digit.
5-3 Press the [SETUP/ESC] button to move the cursor
back to the previous digit.
5-4 Repeat steps 5-1, 5-2 and 5-3 until all digits are
entered.
5-5 Press the JogDial when the cursor is on the right
end digit to validate the entered title. The cursor
moves to POSI. column.
Note: A bullet (centered dot) stands for a space, used
for deleting entered characters.
6. Select a display position with the JogDial.
The default setting for camera 1, 2, 5, and 6 is R-
LOWER, for camera 3, 4, 7, and 8 is R-UPPER.
R-LOWER: Displays the camera title in the right lower
corner.
R-UPPER: Displays the camera title in the right upper
corner.
L-LOWER: Displays the camera title in the left lower
corner.
L- UPPER: Displays the camera title in the left upper
corner.
Note: When 9-split screen is displayed, the camera title
position is fixed to R-LOWER.
7. Press the [D] or [C] button to select the next item, or
press the [SETUP/ESC] button to quit the display setup.
31
•

System Setup SYSTEM SETUP

There are two pages of the system setup. To turn a new
page, continue to move the cursor with the [D] or [C] but-
ton.
SYSTEM SETUP (1 OF 2)
PASSWORD LOCK
ALL
OPERATION
KEYLOCK BUZZ
SKIP ALM-RECALL
SIMUL REC&PLAY
ALTER DETECT
DISK END MODE
DISK END BUZZ
SYSTEM SETUP (2 OF 2)
PLAY PRIORITY
TIME ADJUST SETUP
AUTO ERASING
Password Lock Setup PASSWORD
LOCK
A five-digit password is entered to protect all settings,
recorded pictures, and operating status against erroneous
operation and tampering. Settings alone can be also pro-
tected from unauthorized access. While the LOCK indicator
on the front panel is on, a message "NOW KEY LOCKED!"
is displayed to warn unauthorized operators. If accessed in
this condition, the buzzer beeps.
ALARM
SUSPEND
OPERATE
RESET
SYSTEM SETUP (1 OF 2)
PASSWORD LOCK
ALL
OPERATION
KEYLOCK BUZZ
SKIP ALM-RECALL
SIMUL REC&PLAY
ALTER DETECT
DISK END MODE
DISK END BUZZ
1. Move the cursor to PASSWORD LOCK with the [D] or
[C] button.
OFF
*****
*****
ON
5PAGE
ON
OFF
CONTINUE
ON
LOCAL
O
OFF
TIMER DST
REMOTE
LOCK OSD SE
OFF
*****
*****
ON
5PAGE
ON
OFF
CONTINUE
ON