www.intertec.info Table of contents 1 General .................................. 3 2 Use ................................... 3 3 Explanation of symbols for warnings and signal words .................. 3 4 Safety information .............................. 3 5 Installation accessories ............................ 4 6 Technical Data ................................ 4 7 Installation................................ 4 8 Connection................................
Operating Instructions SL HORIZOTHERM DNA General DANGER These operating instructions describe the safe and proper way to work with the device. The safety informa- DANGER tion and instructions given as well as the local accident This sign is warning about an extremely hazardous situ-...
Rated output Lock washers shape J 6.4 Rated voltage/Operating voltage If one of the components listed here is not included in Illustration 1: Example: SL HORIZOTHERM DNA 100 T3 40 the scope of delivery, then please contact the manufac- TS30 label turer.
Operating Instructions SL HORIZOTHERM DNA The connection cable must be permanently installed up Connection to the inlet into the on-site junction box, taking the per- missible bending radius = 5 x outer diameter into consid- INFO eration. The device may only be connected up and secured by a In the dust Ex area, the applicable requirements of EN trained person, taking into account the "rated voltage"...
Operating Instructions SL HORIZOTHERM DNA Junction Junction box Option AM Option AM Heater Heater bn=brown bu=blue ye/gn=yellow/green bk=black gy=grey bn=brown bl=blue ye/gn=yellow/green bk=black gy=grey Illustration 5: SL...THERM with TAE Illustration 6: SL...THERM with TS Commissioning If the heater is installed in accordance with the notes in the Installation [}Page ...
Operating Instructions SL HORIZOTHERM DNA Functional and safety test intervals can be freely selec- NOTICE ted by the operator in accordance with the applicable regulations. Environmental damage may be caused if dis- Repairs may only be carried out by the manufacturer in posed of incorrectly! the factory.
Operating Instructions SL HORIZOTHERM DNA Dipl.-Ing. Martin Hess, Managing Director Further information and service If the information contained in this instruction manual should not be sufficient in any way, then INTERTEC would be glad to be at your disposal to provide further in- formation and service.