www.intertec.info 1 General .................................. 3 2 Use................................... 3 3 Special conditions for safe use .......................... 3 4 Explanation of symbols for warnings and signal words .................. 3 5 Safety information.............................. 4 6 Installation accessories............................ 4 7 Technical Data ................................ 4 8 Installation ................................
www.intertec.info Operating Instructions SL MICROTHERM DC.A General GB/T 3836.1-2021 : Explosive atmospheres - Part 1: Equipment – General requirements These operating instructions describe the safe and GB/T 3836.2-2021 : Explosive atmospheres - Part 2: proper way to work with the device. The safety information and instructions given as well as the local Equipment protection by flameproof enclosures “d”...
www.intertec.info Operating Instructions SL MICROTHERM DC.A Piece Description NOTICE Heating unit Angle bracket made of flat steel NOTE Packet of screws containing the following: It is essential to pay attention to this safety advice as you Hexagon bolts M 6x12 may otherwise incur material damage.
www.intertec.info Operating Instructions SL MICROTHERM DC.A NOTICE Carefully remove When removing from the packaging and during transport, the connection line must not be stressed or bent. Modifications and repairs may only be carried out by the manufacturer. Free convection may not be impeded. You will find the minimum distances and installation position in the following figure.
Page 6
www.intertec.info Operating Instructions SL MICROTHERM DC.A Additional equipotential bonding is required. The terminal block designated for this purpose has the ground sign. Junction box ATTENTION: Never remove the adapter/ cable gland! Illustration 2: Example heater with KLE connection CAUTION NOTICE: Do not remove adapter/ cable connection to connect up the heater! This would cause irreversible damage to the heater and this would mean that the explosion protection can no...
www.intertec.info Operating Instructions SL MICROTHERM DC.A CAUTION Sufficient heat dissipation must be ensured. Unauthorized covers must be removed as otherwise there is the risk of the heater overheating. The heating circuit is permanently disconnected by a Junction box temperature melt fuse which can't be reset if these installation instructions are not adhered to.
www.intertec.info Operating Instructions SL MICROTHERM DC.A If the heater fails, check the installation. Carry out a Declaration of Conformity continuity test on the heating circuit. Pay attention to the manufacturer, INTERTEC-Hess GmbH, connection diagram switching point Raffineriestrasse 8, 93333 Neustadt/Donau, Germany, thermostat! hereby declares in sole responsibility that the product Product / Type designation:...
www.intertec.info Operating Instructions SL MICROTHERM DC.A will find more detailed information Certificate CCC manufacturer warranty from INTERTEC for heating systems and accessories. See also These instructions do not claim to take all 2 CCC certificate SL ...THERM No. designs, options or changes into 2020322312003002 valid_20251026 [} 9] consideration, even in association with installation, operation or maintenance.
Page 10
www.intertec.info Operating Instructions SL MICROTHERM DC.A 雹) 中国国家强制性产品认证证书 邑 SiTiiAs Worldwide Access 证书编号:2020322312003002 lntertec Hess_ GmbH 认证委托人名 称: Schroep I erstrasse 37, 85053, I ngo I stadt, Germany 认证委托人地 址: lntertec Hess GmbH 生 产者名 称: 生 产者地 址: Schroep I erstrasse 37, 85053, I ngo I stadt, Germany 生产企业名称:...
Need help?
Do you have a question about the SL THERM Series and is the answer not in the manual?
Questions and answers