Emerson Keystone OM13 - EPI2 Installation, Operation And Maintenance Manual page 19

Installation, Operation and Maintenance Manual
VCIOM-01495-EN Rev. 1
•
•
•
Figure 28
Figure 29
Installation
Remove the 3-wire power connector cable from the power card as indicated in
Figure 28.
Remove the 2-pins cable from connector on the power card as indicated in Figure 29.
Remove the 3 screws from the logic board; screw the 3 metal spacers and insert
the plastic spacer as indicated in Figure 30.
Section 2: Installation
May 2022
15