Emerson Keystone OM13 - EPI2 Installation, Operation And Maintenance Manual page 21

Installation, Operation and Maintenance Manual
VCIOM-01495-EN Rev. 1
•
•
Figure 33
Figure 34
•
•
Installation
Reconnect the 8-pins connector cable and 4-pins connector black cable as seen in
Figure 33.
Connect the 3-wire power connector cable of the terminal board to the OM13
card as seen in Figure 34.
Reconnect the 4-pins connector cable as seen in Figure 35.
Connect the 3-pins connector cable of the OM13 module to the logic card as seen
in Figure 36.
Section 2: Installation
May 2022
17