Emerson Keystone OM13 - EPI2 Installation, Operation And Maintenance Manual page 25

Installation, Operation and Maintenance Manual
VCIOM-01495-EN Rev. 1
•
•
Figure 41
Figure 42
•
•
Installation
Remove the 3-wire power connector cable from the power card as seen in Figure 41.
Screw the 3 spacers and unscrew the screw that fixes the motor cable as seen in
Figure 42.
screw
Place the OM13 card onto the spacers and tighten the 4 screws as seen in Figure 43.
Reconnect the 8-pins connector cable, the 4-pins connector black cable and the
4-pins connector white cable as seen in Figure 44.
Section 2: Installation
May 2022
spacers
21