Emerson Keystone OM13 - EPI2 Installation, Operation And Maintenance Manual page 11

Installation, Operation and Maintenance Manual
VCIOM-01495-EN Rev. 1
•
•
Figure 11
Figure 12
•
•
Installation
Connect the 3-pins connector cable of the OM13 module to the logic card as
shown in Figure 11.
Reconnect the 8-pins connector cable and 4-pins connector cable as shown in
Figure 12.
Connect the 2-pins black connector from OM13 module to the 2-pins connector
previously removed as shown in Figure 13.
Connect the 2-pins connector black cable from the OM13 module to the power
card as shown in Figure 14.
Section 2: Installation
May 2022
7