4.2
Viewing the report from the machine
6
Select the part you want to check, and press [OK].
The detected page is displayed.
% For details on the detection location, refer to Web Utilities of the Auto Inspection Unit UK-301.
Type
[Set]
[Page]
[Stain Total]
[Stain(XXX) Level(n)]
[Omission Total]
[Omission(XXX) Level(n)]
[Barcode Total(n)]
[Blank(m)]
[Decode Error(m)]
[1st/2nd Mismatch(m)]
[Sequential Check Mis-
match(m)]
[Serial No.(0-9)Total(n)]
[Blank(m)]
[Decode Error(m)]
[1st/2nd Mismatch(m)]
[Sequential Check Mis-
match(m)]
Automatic Inspection Operation Manual
Description
Indicates the number of the set in which an out-of-range image is
detected.
Indicates the number of the page on which an out-of-range image is
detected.
Indicates the total number of detected stains. Up to 20 stains are
displayed.
Displays the stain level (n). For details on the stain level, refer to
"2.1.2 [Automatic Inspection Level Setting]" in this manual.
XXX: Serial No.
Indicates the total number of detected omissions. Up to 20 omis-
sions are displayed.
Displays the omission level (n).
XXX: Serial No.
Displays the number (n) of barcode or QR code errors.
Displays the area in which the barcode or QR code was blank.
m: Area No.
Displays the area in which barcode or QR code decoding failed.
m: Area No.
Displays the area in which front/back mismatching of barcode or QR
code occurred.
m: Area No.
Displays the area in which a sequential error of a barcode or QR
code occurred.
m: Area No.
Displays the number (n) of number errors.
Displays the area in which the number was blank.
m: Area No.
Displays the area in which number decoding failed.
m: Area No.
Displays the area in which front/back mismatching of number oc-
curred.
m: Area No.
Displays the area in which a sequential error of a number occurred.
m: Area No.
4
4-6