Konica Minolta AccurioPress C6100 Operation Manual page 66

8.3 Decoding the Barcode Area or Serial No. (0-9) Area to Check the Contents
5
Select the held print job, and press [Job Ticket].
The [Job Ticket Edit] screen is displayed.
6
Press [Auto Inspection], set [Inspection Setting] to [ON], and enable [Create New] in [Reference Image
Setting].
% For details on the procedure, refer to "3.1. Creating a New Reference Image for Automatic Inspec-
tion" in this manual.
7
Press [Sample Output].
A reference image for automatic inspection is created.
8
Check the contents of the created reference image.
% The printed data is registered as a reference image. The file name of the reference image is the same
as the original.
% The printed data is also registered and displayed as a reference image in [Reference Image Man-
agement] - [Reference Image List 1] on the [MACHINE] screen. For details, refer to "6.1. Managing
Reference Images" in this manual.
% If you want to recreate a reference image as the result of checking the contents, execute steps 1 to
7 again.
Automatic Inspection Operation Manual
8
8-10