2.1
Presetting the Details of Automatic Inspection
2.1.3
[Automatic Inspection NIC Setting]
Selecting [Automatic Inspection NIC Setting] allows you to check the automatic inspection report from Web
Utilities of the Auto Inspection Unit UK-301. This value is set by default at the time of installation.
To check or change the setting, follow the procedure below.
-
[Utility] - [Administrator Setting] - [Network Setting] - [Automatic Inspection NIC Setting]
Setting item
[IP Address]
[Subnet Mask]
[Gateway Address]
[Line Speed Setting]
Automatic Inspection Operation Manual
Description
Specify the IP address of the Auto Inspection Unit
UK-301.
Specify the subnet mask of the Auto Inspection
Unit UK-301.
Specify the gateway address of the Auto Inspec-
tion Unit UK-301.
Specify the line speed of the Auto Inspection Unit
UK-301. Adjust to suit your network environment.
2
2-5