Konica Minolta AccurioPress C6100 Operation Manual page 22

3.1 Creating a New Reference Image for Automatic Inspection
6
Select the [Create New] check box in [Reference Image Setting].
7
Specify each item, and press [OK] to apply the setting.
When deleting [Reference Image] when printing is finished, select [Delete at the End].
In [Inspection Level Setting], specify the desired level depending on the output purpose.
8
Press [New Store] or [Overwrite].
The setting is stored, and the display returns to the [Hold Job] screen.
Automatic Inspection Operation Manual
3
3-3