Page 1
18ft Camera Crane Jib with Stand (P-18-JS) A s s e m b l y M a n u a l What’s In The Box Please inspect the contents of your shipped package to ensure you have received everything that is listed below.
Page 2
Jib Stand Setup Slide Central Post of Jib onto the Jib Stand and tighten knob-2 to secure it. Knob 2 Open shank from central post. Leave the black washers at one side help of wrench. Jib Sections Setup ...
Page 3
Loosen the bolt from the connecting bar with the help of a 6mm Allen key and wrench, then insert the bolt using the holes provided. Then tighten them together using provided Allen key and wrench as shown in the image. Tighten Bolt ...
Page 4
Secure your camera setup with weight closers as shown. Note: Once you discover correct balance, con- sider marking the weights for that particular camera; facilitating an easier set up the next time. Lock the pin for keeping your camera in a fixed angle to take stable shots.
Page 5
Gimbal Stabilizers. Camera Mount Tilt Control offers both Auto tilt mode and a Manual tilt mode with a control handle. YOUR PROAIM 18ft CAMERA CRANE JIB WITH STAND ALL DRESSED UP AND READY TO GO! (SHOWN WITH OPTIONAL ACCESSORIES) Warranty: We offer one year warranty for our products from date of purchase. Within this period of time, we will repair it without charge for labor or parts.