4ft versatile overhead camera platform system (11 pages)
Summary of Contents for PROAIM P-18-JS
Page 1
18ft Camera Crane Jib with Stand for Gimbals Pan-Tilt & Fluid Head (P-18-JS) A s s e m b l y M a n u a l What’s In The Box Please inspect the contents of your shipped package to ensure you have received everything that is listed below.
Page 2
Jib Stand Setup Slide Central Post of Jib onto the Jib Stand and tighten knob-2 to secure it. Knob 2 Open shank from central post. Leave the black washers at one side help of wrench. Jib Section Setup ...
Page 3
Continue the Arm build by sliding in section 3 onto section 4 as shown in the image. Connecting Bar Loosen the bolt from the connecting bar with the help of a 6mm Allen key and wrench, and then insert the bolt using the holes provided. ...
Page 4
Insert weight rod of section 5 then with a 1” hole, according to your camera setup requirements. Secure them with Weight Closers. Secure your camera setup with weight closers as shown. NOTE: Once you discover correct balance, consider marking the weights for that particu- lar camera;...
Page 5
YOUR PROAIM 18ft CAMERA CRANE JIB WITH STAND FOR GIMBALS, PAN-TILT & FLUID HEAD ALL DRESSED UP AND READY TO GO! (SHOWN WITH OPTIONAL ACCESSORIES) Warranty: We offer one year warranty for our products from date of purchase. Within this period of time, we will repair it without charge for labor or parts.