Table of Contents
Advertisement
Fiber-Optic Gigabit Ethernet NIC Features
The fiber-optic Gigabit Ethernet NIC supports:
You can configure and monitor Gigabit Ethernet NIC interfaces with Nokia
Network Voyager. Specifically, you set the port speed and full-duplex mode
with Network Voyager.
For information about how to access Network Voyager and the related
reference materials, see
Information"
Figure 16 Dual-Port Fiber-Optic Gigabit Ethernet NIC Front Panel Details
\
After the power is turned on and the cables are connected, the Ethernet link
LEDs on both the IP1200 Series and on the remote equipment illuminate to
indicate the connection. As data is transmitted, the activity LEDs on the
appliance illuminate.
Nokia IP1200 Series Security Platform Installation Guide
High bandwidth
Full-duplex mode operation up to 1 Gbps (no half-duplex support)
Link speed auto advertising
Hot swapping tracing through tcpdump
Compliance with IEEE 802.3z Gigabit Ethernet specification
on page 48.
Port 1 (P1)
Dual-Port Fiber-Optic Gigabit Ethernet NIC
"Accessing Nokia Network Voyager Reference
Port 2 (P2)
Link LED (green)
Activity LED (yellow)
00239b
79
Advertisement
Table of Contents
