Connectors And Cables; Figure 19 Two-Port Gigabit Ethernet Nic, Fiber - Nokia IP300 Series Installation Manual

The two-port Fiber Gigabit Ethernet Card provides the following features:
High bandwidth
Full-duplex mode operation up to 1 Gbps (no half-duplex support)
Link speed auto advertising
Tracing through tcpdump
Compliance with PCI Industrial Computer Manufacturers Group
(PICMG) cPCI specification v2
Compliance with IEEE 802.3z Gigabit Ethernet specification
You can configure and monitor Ethernet interfaces with Nokia Network
Voyager, the Web-based element management interface to Nokia IP security
platforms. Specifically, you set the port speed and full-duplex mode with
Network Voyager.
Figure 19
Ethernet NIC you use in the IP300 Series appliance.

Figure 19 Two-Port Gigabit Ethernet NIC, Fiber

Connectors and Cables

To connect the two-port Gigabit Ethernet NIC to other network components,
use a multimode, fiber-optic cable with an LC connector for each NIC
Nokia IP300 Series Security Platform Installation Guide
All manuals and user guides at all-guides.com
shows the front panel details for the two-port fiber-optic Gigabit
Link LEDs (green or yellow)
Activity LEDs (yellow)
Ports
Two-Port Gigabit Ethernet Card, PMC, Fiber
53