Table of Contents
Advertisement
8
Installing and Replacing Other Components
Installing a Fan Unit
The fan unit is hot swappable. You can remove and install the fan unit on the
back of the IP1200 Series without shutting the appliance down.
Before You Begin
To replace a fan unit, you need:
To replace a fan unit
1. Locate the fan unit on the back of the IP1200 Series and the four retaining
2. Loosen the retaining screws by turning them counterclockwise.
140
Physical access to the IP1200 Series.
Replacement fan unit kit and appropriate documentation.
Caution
Components inside the appliance can overheat if they are not cooled
even for a short period of time. If you are replacing a failed fan unit,
and do not completely remove power to the appliance, do not allow
the appliance to run without a fan unit for any longer than necessary.
screws that secure it.
Nokia IP1200 Series Security Platform Installation Guide
Fan unit
00308a
Advertisement
Table of Contents
