Setting The Variables; Setenv - Nokia IP1200 Series Installation Manual

ls
Use the ls command to view the contents of directories on the devices in your
IP1200 Series. The command has the following syntax:
ls device directory
where device is the device that contains the directory you want to look at, and
directory is the directory on that device. Both device and directory are
optional. The default directory is /image on the wd0 device.
For example:
BOOTMGR[2]> ls wd0 /image/current
.description
VERSION
bin

Setting the Variables

setenv

Use the setenv command to set a particular variable. The command has the
following syntax:
setenv name value
where name is the name of the variable, and value is the new value you want
the variable to assume.
For example:
BOOTMGR[2]> setenv autoboot YES
sets the value of autoboot to YES.
Nokia IP1200 Series Security Platform Installation Guide
bootmgr etc
cdrom ipso.tgz
dev kernel
kernel.debug
mnt
sbin
Variables
usr
web
103