Nokia IP1200 Series Installation Manual page 137

5. Position the three male PMC connectors on the card over the three female
Nokia IP1200 Series Security Platform Installation Guide
The connectors are located near the back of the motherboard near the
DIMM sockets.
Standoffs
Caution
Do not use the PMC connectors located at the front of the
motherboard for the acceleration card. Those connectors are for the
management card.
PMC connectors on the motherboard.
Installing a Nokia Encryption Accelerator Card
A B
Insert the VPN card
into connectors.
Screw card into
standoffs.
00324
137