Table 2 Nokia Ip1200 Series Security Platform Specifics - Nokia IP1200 Series Installation Manual

1
Overview

Table 2 Nokia IP1200 Series Security Platform Specifics

IP Security
Platform IPSO Version
IP1260 v3.7 or later
IP1220 v3.8 or later
The IP1200 Series is a two-rack unit appliance that incorporates a serviceable
slide-out tray into the chassis design. The front panel of the IP1200 Series has
two I/O slots that support hot-swapping operations. A PMC carrier is
provided for the I/O slots. Each PMC carrier supports two PMC network
interface cards (NICs) for a total of four NICs. These network interfaces
provide exceptional data forwarding and monitoring performance when used
with Nokia and partner applications. The front panel of the IP1200 Series also
contains:
The network interfaces in the external PMC slot are designated for
management, monitoring, and high-availability traffic. Partner application
and operating system storage is provided on mirrored hard disks in the two
storage device slots.
The IP1200 Series is designed to meet other mid- to high-end availability
requirements, including port density for connections to redundant internal,
external, DMZ, and management networks. In addition, the IP1200 Series
20
Software
Check Point NG FP3 (hf2)
Nokia Secure Access System
v1.02 or later
Check Point NG with
Application Intelligence R55
two storage device slots
two PCMCIA slots
a console port
a serial port
a four-port Ethernet management interface
Nokia IP1200 Series Security Platform Installation Guide
Initial Memory Upgradeable
Configuration RAM
1 GB 2 GB
512 MB 1 GB