Answering System - Panasonic KX-TG2388 Operating Instructions Manual

Answering System

Problem
The Answering System is
on, but incoming
messages are not
recorded.
" E " flashes and the
ANSWER ON indicator
flashes rapidly. No new
messages are recorded.
You cannot operate the
Answering System from
the base unit or the
handset.
You cannot operate the
Answering System from a
touch tone phone.
You cannot erase
messages.
When you play back
messages or turn on the
Answering System, the
handset and base unit
announce the wrong day
and time.
For assistance, please visit http://www.panasonic.com/consumersupport
L The recording time is set to "Greeting only". Select "1
minute", "2 minutes" or "3 minutes" (page 54).
L Memory is full. Erase unnecessary messages
(page 49)
L Memory is full. Erase unnecessary messages
(page 49).
L If another user is in use, you may not be able to operate
the Answering System. Try again later.
L If another user is listening to messages or the
Answering System is handling a call, you cannot
operate the Answering System. Try again later.
L When the unit is announcing a list item (name or phone
number) or a dialed number, you cannot operate the
Answering System. Try again later.
L Make sure you entered the correct remote code
(page 54).
L The Answering System may not respond if the tones
are too short to activate the unit. Press each button
firmly.
L The Answering System is off. Turn it on (page 47).
L While another user is operating the Answering System
or a caller is leaving a message, you cannot erase
messages.
L The date and time may be set incorrectly. Set the date
and time again (page 15).
Useful Information
Cause & Remedy
65