Chain Dial Feature Using The Handset; Editing Items In The Phonebook; Erasing Items In The Phonebook - Panasonic KX-TG2388 Operating Instructions Manual

Phonebook
L "2=volume" will not be displayed
when the Name Announcement is
turned off.
L If the Name Announcement is turned off
(page 44), the handset will not
announce the name or phone number
displayed on the handset.
The handset will not make
announcements, when:
L the Name Announcement is turned
off
L the Answering System is in use
L the handset has lost communication
with the base unit
L the base unit is announcing
L the base unit is making an outside
call.
Chain dial feature using the
handset
This feature allows you to dial phone
numbers from the phonebook while you
are on a call.
Example: Using a long distance calling
card
1 Dial from the phonebook:
1-800-012-3456 (Calling card access
number).
2 When prompted, dial from the
phonebook:
1234 (Calling card PIN).
3 When prompted, dial from the
phonebook:
1-555-012-3456 (the person you want
to call).
1
During an outside call, press
{MENU}.
2
Search for the desired item by pressing
{V} or {^}.
3
Press {Call}.
L The phone number is dialed.
L If required, repeat steps 1 to 3 for any
remaining numbers.
24
For assistance, please visit http://www.panasonic.com/consumersupport
Note:
L When storing a calling card access
number and your PIN in the phonebook
as one phonebook item, press {P} to
add pauses after the number and PIN as
necessary (page 17).
L If you have rotary or pulse service, you
need to press {*} before pressing
{MENU} in step 1 to change the dialing
mode temporarily to tone.

Editing items in the phonebook

1
Press {Phone book} (right soft key).
2
Press {V} or {^} repeatedly to display
the desired item.
3
Press {Edit}.
4
Edit the name if necessary. See the
character table on page 22 for
character entry.
5
Press {V}.
6
Edit the phone number if necessary.
7
Press {V}, then press {Save}.
L To edit other items, repeat from step
2.
8
Press {OFF}.

Erasing items in the phonebook

1
Press {Phone book} (right soft key).
2
Press {V} or {^} repeatedly to display
the desired item.
3
Press {Erase}.
L To cancel erasing, press {No}.
4
Press {Yes}.
L To erase other items, repeat from
step 2.
5
Press {OFF}.