Battery Installation; Battery Charge - Panasonic KX-TG2388 Operating Instructions Manual

If you subscribe to a DSL service
L Please attach a noise filter (contact your
DSL provider) to the telephone line
between the base unit and the telephone
line jack in the event of the following:
– Noise is heard during conversations.
– Caller ID features (page 27) do not
function properly.

Battery installation

1
Insert the battery (1), and press it
down until it snaps into the
compartment (2).
2
Close the handset cover.

Battery charge

Place the handset on the base unit or
charger for 6 hours before initial use.
L Make sure to place the handset with the
keypad facing up to charge the handset
battery. If the keypad is not facing up, the
handset battery can not be charged.
L The unit will beep once, the CHARGE
indicator will light, and "Charging" will
be displayed.
For assistance, please visit http://www.panasonic.com/consumersupport
2
1
L "Charge completed" is displayed
when the battery has been fully charged.
The CHARGE indicator will remain lit.
Base unit
CHARGE Indicator
Charger unit
CHARGE Indicator
L If you attach the shoulder rest
attachment to the handset (page 59),
charge the handset using the charger.
Note:
L To ensure the battery charges properly,
clean the charge contacts of the
handset, base unit and the charger with
a soft, dry cloth once a month. Clean
more often if the unit is subject to
grease, dust, or high humidity.
Preparation
9