Locator/Intercom; Making Intercom Calls; Answering Intercom Calls - Panasonic KX-TG2388 Operating Instructions Manual

Locator/Intercom

Locator/Intercom
Intercom calls can be made between the
handset and the base unit.

Making intercom calls

Using the handset
1
Press HOLD/INTERCOM}
{
L The base unit will ring for 1 minute.
L To stop paging, press {OFF}.
2
When the paged party answers, start
talking.
L You can switch to the speaker by
pressing {s}. To switch back to the
receiver, press {C}.
3
To disconnect the intercom, press
{OFF}.
Using the base unit
1
Press {LOCATOR/INTERCOM}.
L The SP-PHONE indicator lights.
L The handset will ring for 5 minutes.
L To stop paging, press {SP-PHONE}
or {LOCATOR/INTERCOM}.
2
When the paged party answers, talk
into the MIC.
3
To disconnect the intercom, press {SP-
PHONE} or {LOCATOR/INTERCOM}.
L The indicator light goes out.
32
For assistance, please visit http://www.panasonic.com/consumersupport
.
Calling Base
Intercom
00-00-05
During an intercom call:
L If you have difficulty hearing while
using the handset speakerphone and
base unit speaker, decrease the
speaker volume by pressing
VOLUME {<} on the base unit or {V}
on the handset.
L If an incoming call is being received,
you will hear two tones (incoming call
tone, page 40) and "BC"
will flash rapidly on the base unit.
To answer the call;
— if using the handset, press {OFF},
then {C} or {s}.
— if using the base unit, press {SP-
PHONE} twice.

Answering intercom calls

Using the handset
When a handset is paged, it rings and the
Ringer/Message Alert indicator flashes
rapidly.
1
Press {C}, {s} or {HOLD/
INTERCOM}.
L You can also answer a call by
pressing any button except {V}, {^}
or {OFF}.
2
To disconnect the intercom, press
{OFF}.
Using the base unit
When the base unit is being paged, it rings.
1
Press {SP-PHONE} or {LOCATOR/
INTERCOM}.
2
To disconnect the intercom, press {SP-
PHONE} or {LOCATOR/INTERCOM}.
Call from Base