Making/Answering Calls; Making Calls; Using The Handset - Panasonic KX-TG2388 Operating Instructions Manual

Making/Answering Calls

Making calls

Using the handset

Display
Soft Keys
{C}
{s}
{HOLD/INTERCOM}
1
Lift the handset and press {C}.
L "Talk" is displayed.
2
Dial the phone number.
3
When finished talking, press {OFF} or
place the handset on the base unit or
charger.
To use the speakerphone
1
Lift the handset and press {s}.
L "SP-phone" is displayed.
2
Dial the phone number.
3
When the other party answers, speak
into the microphone.
4
When finished talking, press {OFF} or
place the handset on the base unit or
charger.
Note:
L Talk alternately with the caller in a quiet
room.
16
For assistance, please visit http://www.panasonic.com/consumersupport
{OFF}
{V}, {^}
{REDIAL}
Microphone
L If the other party has difficulty hearing
you, press {V} to decrease the speaker
volume.
L While on a call, you can switch from the
receiver to the speakerphone by
pressing {s}. To switch back to the
receiver, press {C}.
To dial after confirming the entered
number (Pre-dial)
1
Enter the phone number.
L The handset announces each button
you press, including {1} to {0}, {*}
("Star"), {#} ("Pound"), {FLASH/
CALL WAIT} ("Flash") and {Pause}.
L The announcement is heard at the
speaker volume. To increase or
decrease volume, press {^} or {V}.
L If you misdial, press {Clear}. Enter
the correct number.
L If a pause is required when dialing,
press {Pause} where needed
(page 17).
L To cancel, press {OFF}.
2
Press {C} or {s}.
3
When finished talking, press {OFF} or
place the handset on the base unit or
charger.
Note:
L If the Handset Talking Keypad is turned
off (page 44), the handset will not
announce the buttons you press.
The handset will not make
announcements, when:
• the Handset Talking Keypad is turned
off
• the Answering System is in use
• the handset has lost communication
with the base unit
• the base unit is announcing
• the base unit is making an outside
call.