Ringer Settings; Handset Ringer Volume; Base Unit Ringer Volume; Handset Ringer Tone - Panasonic KX-TG2388 Operating Instructions Manual

Ringer settings

Handset ringer volume

4 levels (high/medium/low/off) are
available.
1
Press {MENU}.
2
Scroll to "Ringer setting" by
pressing {V} or {^}, then press
{Select}.
3
Press {Select} at "Ringer volume".
4
Select the desired volume level by
pressing {V} or {^}.
L The volume will change and ring.
L The number of steps indicates the
volume level.
L To turn the ringer off, press {V}
repeatedly until "Off ?" is displayed.
5
Press {Save}.
Note:
L When the ringer volume is set to off, the
handset will not ring for outside calls.
The handset will ring at the low level for
intercom calls.
L When the ringer volume is set to off, the
handset will not announce caller names
(page 27).
L If the handset ringer is turned off, "Ringer
off" will be displayed while not in use. If
the handset is off the base unit or charger
when there are missed calls (page 28) or
new messages (page 49), "Ringer off"
is not displayed.
L You can adjust the ringer volume while
an outside call is ringing. Press {V} or
{^} while the handset is ringing.
Temporary ringer off
While the handset is ringing for an outside
call, you can turn the ringer off temporarily
by pressing {OFF}. The handset will ring
again as normal the next time a call is
For assistance, please visit http://www.panasonic.com/consumersupport
Programmable Settings
received.

Base unit ringer volume

To set the ringer volume to high (preset),
medium, or low, press VOLUME {<} or
{>}.
L To increase volume, press VOLUME
{>}. To decrease volume, press
VOLUME {<}.
L To stop ringing, press {STOP}.
To turn the ringer off, press and hold
VOLUME {<} until 2 beeps sound.
O
L " " is displayed.
To turn the ringer on, press VOLUME {>}
or {<}.
L The base unit will ring at low level.
L You can adjust the ringer volume while
an outside call is ringing. Press
VOLUME {<}
unit is ringing.
To turn the ringer off, press and hold
VOLUME {<} for 2 beeps sound.
O
" " is displayed.

Handset ringer tone

You can change the ringer tone heard
when an outside call is received. There are
3 tones and 4 melodies.
Important:
L You cannot change the ringer tone for
intercom calls.
L If you subscribe to a Distinctive Ring
Service (such as IDENTA-RING) from
your telephone company with 2 or 3
consecutive rings, select a bell ringer
pattern (Tone 1 to 3). If you select a
melody pattern, you will not be able to
distinguish lines by their ringers.
L If you select one of the melody ringer
patterns, the ringer will continue to
sound for several seconds if:
– the caller hangs up before you answer
the call, or
or
{>} while the base
39