Troubleshooting - Outback Excel 100 Assembly And Operating Instructions Manual

L. Troubleshooting
Problem
Burners will not light using
the ignition system
Burner will not light with a
match
Low flame or flashback
(fire in burner tube— a
hissing or roaring noise
may be heard)
Gas valve knob difficult to
turn
Possible Cause
LP gas bottle is empty
Faulty regulator
Obstructions in burners
Obstructions in gas jets or gas hose
Electrode wire is loose or disconnected
on electrode or ignition unit
Electrode or wire is damaged
Faulty pushbutton ignitor
LP gas bottle is empty
Faulty regulator
Obstructions in burners
Obstructions in gas jets or gas hose
LP gas bottle too small
Obstructions in burners
Obstructions in gas jets or gas hose
Windy conditions
Gas valve jammed
For reference and correspondence,
record your serial number here.
(See sticker on side of barbecue body.)
Serial No.
__________________
This number may be required when
ordering spare parts or accessories. A
part reference number may also be
required where applicable.
23
Solution
Replace with full bottle
Have regulator checked or replaced
Clean burners
Clean jets and gas hose
Reconnect wire
Change electrode and wire
Change ignitor
Replace with full bottle
Have regulator checked or replaced
Clean burners
Clean jets and gas hose
Use larger bottle
Clean burners
Clean jets and gas hose
Use BBQ in a more sheltered position
Replace gas valve