Page 2
Go to Lockly.com/installation to watch a video version of this installation guide. Download the BILT app from the App Store or on Google Play for step-by-step interactive 3-D walk-through installation instructions.
Page 3
Welcome! This guide will walk you through step-by-step how to install and get your Lockly Lux Compact up and running. Installation generally takes less than 30 minutes. If you have any questions please reference our online support at: Lockly.com/support or call (669) 500-8835 for help.
Page 4
Preparation To complete the installation you will need: Phillips Screwdriver Flathead Screwdriver Tape measure or ruler Pliers Screwdriver with drill bits (Optional) Drilling is not required to install the lock, and is optional. However if you are installing your lock on a brand new door, a drill is required if there are no holes prepared for lock installation.
Page 5
Preparation Use provided drilling templates to prepare door for installation. You would need professional door drilling tools. 1-3/8" - 2" (35mm - 50mm) Exterior Panel for Part B 1/2" Measure and confirm your door is 12mm between 1-3/8" - 2" ( 35mm - 50mm). 4-1/8"...
Page 6
Step 1 ADJUSTING LOCKSET TO YOUR DOOR ORIENTATION There are 4 common door-opening directions, the lockset ships default for is for RIGHT IN-SWING Doors. You may skip this step if you are sure your door is a Right In-Swing Door. Otherwise, see the illustrations below to confirm your door opening direction and change your latch throw orientation if needed.
Page 7
Step 1 ADJUSTING LOCKSET TO YOUR DOOR ORIENTATION continued RIGHT OUT-SWING DOOR Make sure the latch throw is correctly oriented as shown to fit your right out-swing door. RIGHT IN-SWING DOOR Make sure the latch throw is correctly oriented as shown to fit your right in-swing door.
Page 8
Step 1 ADJUSTING LOCKSET TO YOUR DOOR ORIENTATION continued HOW TO ADJUST THE LATCH THROW The Factory setting or the throw is for right in-swing door. You do not need to change direction if you have a right in-swing door. Here is here is how to change the latch throw direction.
Page 9
Step 2 INSTALLING THE LOCKSET (PART F) When installing the lockset, ensure the latch is at the top position and deadbolt is at the bottom. Use provide screws to secure the lockset position.
Page 10
Step 3 CHANGING HANDLE FOR RIGHT OR LEFT SWING DOORS Determine right swing or left swing door While facing the door from the inside, if hinges are on the right side you have the right swinging door. If hinges on the left side you have a left swinging door. The lock ships set for right swing doors.
Page 11
Step 3 CHANGING HANDLE FOR RIGHT OR LEFT SWING DOORS continued Confirm that your installation was Check that your handle works complete by checking if the pins smoothly by giving it a turn up are flush against the handle, and and down.
Page 12
Step 3 CHANGING HANDLE FOR RIGHT OR LEFT SWING DOORS continued Remove the screw position on point “R” Use a flathead screwdriver to press the middle marker and move to point “L”. Insert the removed screw from point “R” screw tightly to point “L”.
Page 13
Step 3 CHANGING HANDLE FOR RIGHT OR LEFT SWING DOORS continued Changing the Interior Handle Orientation Securely screw clockwise as shown Remove the screw by turning counter to complete your handle orientation clockwise and rotate the handle 180° change. in the direction of the arrow as shown. Make sure the screw hole is aligned with the marker as illustrated.
Page 14
Step 4 PREPARING LOCK FOR INSTALLATION If you drilled a hole in Preparation, use Slotted Barrel Extension and securely tighten with a flat head screwdriver by turning it clockwise onto the lock. If you did not drill a hole in Preparation, you can leave this pole removed.
Page 15
Step 5 INSTALLING THE LOCK (EXTERIOR) Exterior Install the exterior lock as shown to the left by aligning the lock straight and passing the cable and attached rods through the lockset. Align the lock straight and press hard (if you use the Adhesive tape in step 4.4) to secure the top of the lock.
Page 16
Step 6 INSTALLING THE LOCK (INTERIOR) Insert Positioning Rods into the holes to the left and right of the Spindle Interior The holes are located at the 3 o’clock and 9 o’clock positions. Interior Mounting Plate will go against the interior side of your door. Remove the paper layer off of the Adhesive Tape and align the positioning...
Page 17
Step 6 INSTALLING THE LOCK (INTERIOR) continued Pull the cable from the lock exterior through the rectangular hole underneath the positioning rods and spindle. *Secure top with Remove the position rods replace them with screws Tighten clockwise until the mounting plate is secure.
Page 18
Step 6 INSTALLING THE LOCK (INTERIOR) continued Plug cable that is coming through the door into the lock interior . Match red side of the plug with red on socket - insert tightly. NOTE: If you need to disconnect the cable, make sure to press the snap tab to release the plug before carefully pulling it out.
Page 19
Step 6 INSTALLING THE LOCK (INTERIOR) continued Once the lock interior is flush against the mounting plate, secure the lock to the plate by screwing clockwise using provided screws Insert 4 AA batteries into the lock by aligning the positive and negative orientation markings on the batteries to the battery chamber.
Page 20
Step 7 INSTALLING THE DOOR STRIKE Install the strike box as shown below. Open the door frame, install box, then the strike plate and fix it with screws. After the installation is completed, check if the lock is working smoothly. From the INDOOR, while the door is open, lift the handle to check if the lock opened and closed smoothly and whether the deadbolt and latch are fully extended to the strike.
Page 21
Step 8 DOWNLOAD THE LCOKLY APP Congratulations! You have completed the Lockly Secure physical lock installation. To complete your setup, download the Lockly app from the App Store or on Google Play and follow on-screen instructions. Scan or visit Lockly.com/app...
Page 22
Add more Smart to your Home Secure Link Wi-Fi Hub Add the optional Lockly Secure Link Wi-Fi Hub, together with the free Lockly app, it's easier than ever to securely control and manage your door from anywhere, anytime. Real-time, monitoring, & status...
Page 23
FCC Warning: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Bluetooth SIG, Inc. , and any ® use of such marks by Lockly is under license. Other trademarks and trade names are those of their respective owners. Google, Android, Google Play and Google Home are trademarks of Google LLC.