Polycom RMX 1000 Started Manual page 10

Parameter
Advanced Setting (Optional)
If necessary, you can configure other network parameters according to
the following procedure:
1
Click the Advanced Setting configuration item in the RMX Man-
agement pane.
2
In the Advanced Setting configuration pane, double-click the list
item or right-click and then select Properties.
3
Based on the network requirement, set the routing information in
the following dialog box.
10
Description
Supported speed/duplex modes include
10/100M, Full Duplex or Half Duplex, and the
1000M Network mode. You can also select
Auto to use Auto-Negotiation with the switch
port.
Note: Contact the network administrator before
setting LAN Speed, to ensure that the switch
configuration is matched with the MCU port.