Honda XL350R 1984 Shop Manual page 90

CYLINDER HEAD/VALVES
Install the cylinder head cover.
T ighten the cylinder head cover bolts to the speci·
fied torque.
TORQUE: 6mmbolt! 10-14N'm
11 .0-1 .4 kg-m. 7-10 ft-lb)
8 mm bolt: 24-30 N'm
(2.4-3.0 kg-m. 17- 22 ft-Ib)
NOTE
6 mm Imell head bolt: 8-12 N·m
(0.8- 1.2 kg-m. 6- 9 ft·lb)
Tighten the head cover bolts in 8 criss-cross
pattern in two or more steps,
Adjust the valve clearance (Page 3·8).
Make sure the a ·ring is property seated in the
groove of the valve cover.
Install the valve covers.
Connect the decompression cable and adjust if
necessary
(Page 3-9) ,
Reinstall the' removed parts in the reverse order of
removal.
6~22
.
,
BmmBO LT
a -RING
1
VALV E COVE A
DECO MPRESS ION CABLE VA LVE COVER