Honda XL350R 1984 Shop Manual page 189

INSTAL LAT ION
Set the shock absorber onto the shock arm.
Raise the rear wheel up until the lower mounti ng
bolt can be in stalled.
Align the edge of the shock end with the punch
mark on the shock arm at the left side.
Tighten the lower mount bolt to the specified tor-
que.
TORQUE: 40-50 N·m
(4.0-5.0 kg-m. 29-36 ft-Ibl
Instal l and torque the rear shock absorber upper
mount bolt.
TORQUE : 40-50 N-m
(4.0-5.0 kg-m, 29-36 ft·lbl
Install the removed parts in the reverse order of
removal.
SWING ARM
REMOVA L
Raise the rea r wheel off the ground with a box or
workstand under the engine.
Remove the following:
rear wheel (Page 13-3)
- rear shock absorber (Page 1 3· 11 1
- rear brake linkage
Remove the shock arm pivot boh and swing arm
pivot bolt.
Remove the swing arm.
REAR WHEEL/ BRAKE /SUSPENSION
SH()CK ARM
-
UPPER MOUNT BOLT
13-15