Honda XL350R 1984 Shop Manual page 190

RE AR WHEELIBRAKE /SUSPEN SION
DISASSEMBLY
Remove the chain guide
~Iider.
chain guide, foot
pegs and foot guard.
INSPECTION
Inspect the pivot collar and bearing for wear or
damage.
Replace them if they have score marks, scratChes, or
8Kceuiv8 or abnormal wear.
PIVOT BEAR ING REPLACEMENT
Remove the dust seal and pivot collar.
Install the bearing remover in the swing arm pivot
bearing and expand the tool behind the bearing.
Drive the bearing and thrust bushing out with a slide
hammer.
NOTE
Neller install old bearings, once the bearings
are removed; they must be replaced with new
ones.
13-16
FOOT PEGS
FOOT GUARD CHAIN GUIDE
•
\
CHAIN GUIDE SLIDER
______ ---0
DUST SEAL
:H
rBUSHING
:EP
SWING ARM
BEARING 20
mm
07936- 3710600
REMOVER HANDLE 07936-37 10100
REMOVER WE IGHT 07936-37 10200