Honda XL350R 1984 Shop Manual page 120

CLUTCH /OIL PUMP/ KICK STARTER
RIGHT CRANKCASE COVER
INSTALLATION
Clean the oil strainer and install it.
install the dowel pins and a new gasket .
Make sure that the D·ring is on the oit pipe joint.
Install the right crankcase cover while holding the
cam follower lever up.
Tighten the right crankcase cover bolts.
TORQUE : 8- 12 N ·m
10.8- 1.2 kg.m, 6-9 ft.lb)
Install the kick starter and tighten the bott.
TORQUE: 20-35 N'm
12.0-3.5 kR-m. 14-25 ft-Ib)
Install the right footpeg .
TORQUE: 55-65 N'm
(5.5-6.5
kg-m,
40--47 h -Ib)
NOTE
Check operation of the decompressor and
clutch levers after installing the cover.
Fill the crankcase with recommended oil up 10 the
proper level (Page 2-21.
Adjust the starter
decompre~r
(Page 3·8 ).
Adjust the clutch free play (Page 3·15).
Adju st the rear brake pedal free play (Page 3· 14).
8-18
. _ ...... DOWEl PIN
GASKET
,
,