Honda XL350R 1984 Shop Manual page 85

CYLINDER HEAD ASSEMBLY
NOTE
Install new valve stem seals when assembling.
lubricate each vallie stem with oil.
Insert the valves into the valve guides.
Install the spring seats, valve springs and retainers.
NOTE
Install the valve springs with the tightl y
wound coils facing the cylinder head.
Install the valve cotters using the va lve spring com·
pressor.
CAUTtON
To prevent loss o[ tension, do not compress
the valve spring more than necessary.
Tap the vallie stems gently with a plastic hammer to
firmly seat the cotters.
CAUTION
Support the cylinder head above the working
bench surface to prevent possible ~'Q/ve dam-
age.
CYLINDER HEADIVALVES
VALVE SPRING SEAT STEM SEAL OUTER SPRING
vi,
/~O;
INNER SPR I NG RETAINER VALVE COTTER
VA LVE SPR I NG COMPRESSOR
07757-001 0000 OR 07957-3290001
PLASTIC HAMMERS . . .
6-17