Honda XL350R 1984 Shop Manual page 35

Clean the drjve chain with a non-flammable or high
flash point solvent that will not damage the O-rings
and wipe dry.
CAUTION
• Do
not use a steam cleaner,
high
pressure
washers or aerosol chain lubficams as these
will
dattUlge the O-rings .
• Do not use commercial aerosol chain lubri-
cants. They contai" solvents which could
damage the O-rings.
Inspect the drive chain and O-rings for possible wear
or damage. Rep lace the chain,
if it
is worn
excessill&-
Iy or damaged.
Lubricate the drive chain with SAE 80 or 90 gear
oil.
I
nspeet
the sprocket teeth for excessive wear or
damage. Replace
if
necessary.
NOTE
Never install a new drive chain on worn
sprockets or a worn chain on new sprockets.
Both chain and sprockets must be in good
condition, or the new replacement chain or
sprockets will wear rapidly.
;1'
SOLVENT
~
WIPE DRY
LUBRICATE
t
MASTER LINK
)(
DAMAGE
o
NORMAL
MAINTENANCE
- - - - - -,
SAE 80
OR SAE
90
GEAR OIL
O-RINGS
WEAR
3-11