Honda XL350R 1984 Shop Manual page 184

REAR WHEELIBRAKE/SUSPENSION
Install the damper rubbers.
Apply grease to a new O-ring and install it onto the
groove of the wheet hub.
Install the driven flange .
REAR WHEEL INSTALLATION
Install the brake panel, chain adjusters, stopper
plate and rear axle to the rear wheel.
Place the rear wheel into the swing arm locating the
lang on the swing arm.
Place the slot of the brake panel over the tang of
the swing arm.
Set the stopper plate in place by aligning the hole of
the stopper plate with the stopper pin .
13-10
DRIVEN FLANGE
AXLE NUT STOPPER PLATE AXLE
STOPPER PLAT E STeIPp;'R PIN